[Angstrom-distro-users] Angstrom Linux install iPAQ h3950

[Kurucz István]

Hi all,

I would like to install Angstrom Linux, found in directory
http://www.angstrom-distribution.org/unstable/images/h3900/20070929/
onto my iPAQ h3950. Where can I find a manual/tutorial or help for
that?
Some time ago Familiar-Linux was on it, then I uploaded in "load root"
way the Angstrom-x11-image-glibc-ipk-2007.9-test-20070929-h3900.rootfs.jffs2
image-file, but I left in a certain state the boot-loader
(pxa-bootldr) of Familiar. However the the new system does not work.
After Launching the bootloader the display screen remains dark, in the
system-log is geting:


boot> ser_con
serial console at your service...
boot> set linuxargs "root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200"
setting param <linuxargs> to value <root=/dev/mtdblock1
rootfstype=jffs2 console=ttyS00,115200>
boot> boot
booting jffs2...
booting boot/zImage from partition >root<
loaded file of size = 0x0012F968 at location 0xA0008000
kernel partition base A0008000
kernel_magic=E1A00000
kernel_region_words[9]=016F2818
Linux ELF flash_imgstart=50040000 size=01F80000 dest=A0000000 offset=00008000
MMU Control=00000079
MMU PIDVAM=00000000
Skipping kernel copy by request.
A0008000: E1A00000
A0008004: E1A00000
A0008008: E1A00000
A000800C: E1A00000
A0008010: E1A00000
A0008014: E1A00000
A0008018: E1A00000
A000801C: E1A00000
A0008020: EA000002
A0008024: 016F2818
root_filesystem_name=ramdisk
Grabbed linuxargs, argc = 00000001
Using mach_type 000000CB
setting boot parameters to
root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200
Making core tag at A0000100
Making cmdline tag at A0000114
Making mem32 tag at A00001D4
command line is:
mtdparts=ipaq:0x00040000 at 0x00000000(bootldr)ro,0x01F80000 at 0x00040000(root),0x00040000 at 0x01FC0000(asset)
root=/dev/mtdblock1 rootfstype=jffs2 co
nsole=ttyS00,115200  rootfstype=jffs2
Disabling LCD controller
linuxEntryPoint=A0008000
Booting Linux image
Uncompressing Linux..................................................................................
done, booting the kernel.
[    0.000000] Linux version 2.6.21-hh16 (pfalcon at blackbox) (gcc
version 4.1.2) #1 PREEMPT Sun Sep 16 18:36:53 EEST 2007
[    0.000000] CPU: XScale-PXA250 [69052904] revision 4 (ARMv5TE), cr=0000397f
[    0.000000] Machine: HP iPAQ H3900
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Memory clock: 99.53MHz (*27)
[    0.000000] Run Mode clock: 199.07MHz (*2)
[    0.000000] Turbo Mode clock: 398.13MHz (*2.0, active)
[    0.000000] CPU0: D VIVT undefined 5 cache
[    0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte
lines, 32 sets
[    0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte
lines, 32 sets
[    0.000000] Built 1 zonelists.  Total pages: 16256
[    0.000000] Kernel command line:
mtdparts=ipaq:0x00040000 at 0x00000000(bootldr)ro,0x01F80000 at 0x00040000(root),0x00040000 at 0x01FC0000(asset)
root=/dev/mtdblock1 rootfstype=jffs2 console=ttyS00,115200
rootfstype=jffs2
[    0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[    0.000000] Console: colour dummy device 80x30
[    0.090000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.100000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.110000] Memory: 64MB = 64MB total
[    0.110000] Memory: 62208KB available (2336K code, 242K data, 88K init)
[    0.340000] Mount-cache hash table entries: 512
[    0.340000] CPU: Testing write buffer coherency: ok
[    0.350000] NET: Registered protocol family 16
[    0.380000] asic2: using irq 178-193 on irq 33
[    0.380000] SoC: registering asic2-gpio
[    0.390000] SoC: registering asic2-keys
[    0.390000] SoC: registering asic2-spi
[    0.400000] SoC: registering asic2-adc
[    0.400000] SoC: registering asic2-owm
[    0.420000] Time: pxa_timer clocksource has been installed.
[    0.420000] NET: Registered protocol family 2
[    0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.530000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.540000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.550000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.550000] TCP reno registered
[    0.620000] PXA CPU frequency change support initialized
[    0.620000] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.630000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
[    0.640000] io scheduler noop registered
[    0.650000] io scheduler anticipatory registered (default)
[    0.650000] io scheduler deadline registered
[    0.660000] Corgi Backlight Driver Initialized.
[    0.670000] Console: switching to colour frame buffer device 80x40
[    0.800000] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
[    0.810000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
[    0.820000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
[    0.830000] pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART
[    0.830000] pxa2xx-ir-serial: Initialized
[    0.840000] input: asic2 ts as /class/input/input0
[    0.850000] pxa2xx_udc: version 4-May-2005
[    0.850000] ether gadget: using random self ethernet address
[    0.860000] ether gadget: using random host ethernet address
[    0.870000] usb0: Ethernet Gadget, version: May Day 2005
[    0.870000] usb0: using pxa2xx_udc, OUT ep2out-bulk IN ep1in-bulk
STATUS ep6in-bulk
[    0.880000] usb0: MAC 2a:33:49:1c:e0:2b
[    0.880000] usb0: HOST MAC 9a:2a:af:9e:a5:9f
[    0.890000] usb0: RNDIS ready
[    0.890000] input: gpio-keys as /class/input/input1
[    0.900000] input: asic2 keyboard as /class/input/input2
[    0.910000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
[    0.920000] APM Battery Driver
[    0.960000] TCP cubic registered
[    0.960000] NET: Registered protocol family 1
[    0.960000] NET: Registered protocol family 17
[    0.970000] XScale DSP coprocessor detected.
[    0.970000] sa1100-rtc sa1100-rtc: setting the system clock to
1970-01-01 00:06:01 (361)
[    0.980000] asic3_mmc: ASIC3 MMC/SD Driver, controller at 0x14000000
[    0.990000] h3900_mmc: clock enabled
[    1.560000] Root-NFS: No NFS server available, giving up.
[    1.560000] VFS: Unable to mount root fs via NFS, trying floppy.
[    1.570000] No filesystem could mount root, tried:  jffs2
[    1.570000] Kernel panic - not syncing: VFS: Unable to mount root
fs on unknown-block(2,0)


What should I do in different way to work it?

Thanks for all.