[Angstrom-distro-users] WPA support for Prism based cards

[Graeme Gregory]

On Wednesday 20 June 2007 22:22:57 Marcin Juszkiewicz wrote:
> I am working on script which downloads firmware to RAM on card insert. To
> make it working properly I need outputs of "hostap_diag wlan0" command
> (insert card first and make sure that hostap_cs module is loaded and
> orinoco_cs is not).
>
Planex PRISM3

NICID: id=0x801d v1.0.0 (PRISM III PCMCIA (AT24C08 compatible small serial 
flash))
PRIID: id=0x0015 v1.1.2
STAID: id=0x001f v1.8.4 (station firmware)

Linksys WCF12

NICID: id=0x801b v1.0.0 (PRISM III PCMCIA (SST parallel flash))
PRIID: id=0x0015 v1.1.0
STAID: id=0x001f v1.4.2 (station firmware)

Graeme (XorA)