[Angstrom-distro-users] Newbie: Installing in SD

[Iñigo Lekanda]

Thanks.

I use SPB Backup with scheduleds backups every night.

I have'nt experience with WM5 loosing my data but thanks about the warning.


El Jueves, 8 de Febrero de 2007 00:08, Clarke Wixon escribió:
> WM5 keeps its data in flash, true enough, but I STRONGLY URGE YOU to make a
> backup anyway.  On several occasions my (usually) nonvolatile data store
> has been wiped clean after using HaRET to boot into Linux.  Or perhaps it
> was erased upon trying to reset and get into Windows; it's hard to say. 
> The ONLY way I was able to recover in these instances was to restore a
> backup.
>
> If you don't have a backup program for Windows Mobile 5, may I suggest
> SKTools?  It's only US$13 for a suite of useful utilities including backup,
> which I have found works flawlessly on my HX4700 with WM5.  It only takes
> about five minutes on my machine to make a full backup to my CF microdrive.
>
> > Message-ID: <200702061542.26012.enhering at gabuleu.com>
> >
> > Use ramdisk rescue, from Marcus. I installed familiar
> > linux on a 1 GB SD card with it. WinCE looses all its
> > config when you run linux, but this can be easily
> > solved with a backup.
> >
> > http://www.handhelds.org/moin/moin.cgi/RamdiskRescue
> >
> > On Tuesday 06 February 2007 13:52, I?igo Lekanda wrote:
> > > Hello,
> > >
> > > I would like to install in HX4700, in SD. If it is posible whitout
> > > touch
>
> de
>
> > > internal ROM.
> > >
> > > I know that whit familiar is posible.
> > >
> > > I want to try Angstrom Distribution from my WM5 (it is more updated
> > > that familiar). It is posible?
> > >
> > > I haven't found in wiki howto install in SD or in HX4700.
> > >
> > > Thanks in advance.
> > >
> > > _______________________________________________
> > > Angstrom-distro-users mailing list
> > > Angstrom-distro-users at linuxtogo.org
> > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-use
> > >rs
> >
> > --
> > ---------------------------
> > Eduardo N. Hering, DSc.
> >
> > On the internet:
> >   E-Mail: enhering at gabuleu.com
> >   MSN: enh at gabuleu.com
> >   SKYPE: enhering
> >   JABBER: enh at myjabber.net
> >
> > Work:
> >   CBPF - Centro Brasileiro de Pesquisas F?sicas
> >   http://www.cbpf.br
> >   Rua Dr. Xavier Sigaud 150 - Urca
> >   Rio de Janeiro, Brasil
> >   CEP 22290-180
> >   PHONE: 	+55 21 2141-7347
> >   FAX:		+55 21 2141-7540
> >
> > Personal mobile:
> >   +55 21 8793-9995
> >
> > ----------------------------
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Wed, 7 Feb 2007 00:01:44 +0000
> > From: Marcin Iwinski <marcin.iwinski at gmail.com>
> > Subject: [Angstrom-distro-users] angstrom on Zauri 3200
> > To: angstrom-distro-users at linuxtogo.org
> > Message-ID: <200702070001.44695.marcin.iwinski at gmail.com>
> > Content-Type: text/plain;  charset="us-ascii"
> >
> > Hi,
> > I'm non English native speaker so sorry for my mistakes :)
> >
> > I'm completely newbie with OE stuff.
> > Since few days I'm trying to run angstrom on my zaurus SL-C3200 - but
>
> without
>
> > any success.
> > At the beginning i had problems with env's and when I fixed that, whole
> > building process (I mean "bitbake angstrom-bootstrap-image
> > angstrom-gpe-image") is starting, and after some time it's failing with
>
> these
>
> > information:
> > | | Wrong data_crc at  0x00003dd0, 0xd91ba9e9 instead of 0xd6b50cd7
> > | | Wrong bitmask  at  0x00000000, 0xb691
> > | | Wrong data_crc at  0x00003efc, 0x9adbf9c8 instead of 0x4b7f9c68
> > | | Wrong bitmask  at  0x00000000, 0xca2a
> > | | Wrong data_crc at  0x00003bbc, 0x6d9ab770 instead of 0x92fe4102
> > | | Wrong bitmask  at  0x00000000, 0x5ed3
> > | | Wrong data_crc at  0x00003e38, 0x146eb4e4 instead of 0xc18ff7fb
> > | | Wrong bitmask  at  0x00000000, 0x0bd8
> > | | cat: rm: No such file or directory
> >
> > NOTE: Task
> > failed:
>
> /OE/tmp/work/spitz-angstrom-linux-gnueabi/angstrom-bootstrap-image-1.0-r3/t
>emp/log.do_rootfs.1867
>
> > NOTE: package angstrom-bootstrap-image-1.0-r3: task do_rootfs: failed
> > ERROR: TaskFailed event exception, aborting
> > NOTE: package angstrom-bootstrap-image-1.0: failed
> > ERROR: Build of angstrom-bootstrap-image failed
> >
> > where there is much more lines with "wrong data_crc" and "wrong bitmask".
> >
> > Could anyone help me to fix that problem ??
> >
> > I'm just wondering, first step of HOW-TO for c1000 says: "Download files:
> > zImage.bin, initrd.bin, updater.sh". Is there any website where i can
> > find all these files or do i really need to build angstrom myself ??
> >
> > Thanks in advance and regards
> >
> > Marcin 'iwi' Iwinski
> >
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > Angstrom-distro-users mailing list
> > Angstrom-distro-users at linuxtogo.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
> >
> >
> > End of Angstrom-distro-users Digest, Vol 5, Issue 4
> > ***************************************************