[Angstrom-distro-users] boot h2210
Romain Quidet
romain.quidet at neuf.fr
Sat Feb 3 14:06:58 CET 2007
hello,
I bitbake the last OE angstrom-gpe-image for my ipaq h2210, and the
device is not booting. I use haret and a SD card with 2 partitions (one
vfat for booting haret and the other one ext2 for rootfs)
The device freezes after the set : Freeing init memory : 100K. No error
message appear on the log.
Any help is welcome !!!!
here is my log :
Linux version 2.6.16-hh9 (romain at looping78) (gcc version 4.1.1) #1
PREEMPT Wed
J
an 24 10:07:09 CET 2007
CPU: XScale-PXA255 [69052d06] revision 6
(ARMv5TE)
Machine: HP iPAQ H2200
Memory policy: ECC disabled, Data cache
writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 398.13MHz (*4)
Turbo Mode clock: 398.13MHz (*1.0,
inactive)
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32
sets
Built 1 zonelis
Kernel command line: root=/dev/mmcblk0p2 noinitrd console=ttyS0,115200n8
console
=tty0
PID hash table entries: 512 (order: 9, 8192
bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536
bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768
bytes)
Memory: 64MB = 64MB total
Memory: 61952KB available (2312K code, 466K data, 100K
init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency:
ok
NET: Registered protocol family 16
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager
initialized
Bluetooth: HCI socket layer
initialized
hamcop: using irq 104-129 on irq 28
input: samcop ts as
/class/input/input0
SAMCOP DMA Driver, (c) 2003-2004 Simtec
Electronics
DMA channel 0 at c4903400, irq 120
input: gpio-keys as
/class/input/input1
Initialising wince bootloader suspend
workaround
NetWinder Floating Point Emulator V0.97 (double
precision)
JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2003 Red Hat,
Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
(default)
SA1100 Real Time Clock driver v1.03
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a
FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a
BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a
STUART
pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a
HWUART
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
Battery interface for iPAQ h2200 series - (c) 2004
Szabol
Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 (Toshiba NAND 32MiB
3,3V
8-bit
)
Scanning device for bad blocks
cmdlinepart partition parsing not
available
Using builtin partition definition
Creating 4 MTD partitions on "NAND 32MiB 3,3V
8-bit":
0x00000000-0x00004000 : "HTC first-stage
bootstrap"
0x00004000-0x00028000 : "HTC rescue
bootloader"
0x00028000-0x00168000 : "second-stage
0x00168000-0x02000000 : "root fs"
pxa2xx_udc: version 4-May-2005
input: h2200 buttons as
/class/input/input2
i2c /dev entries driver
I2C: i2c-0: PXA I2C adapter
Driver for 1-wire Dallas network
protocol.
SAMCOP 1-Wire busmaster driver - (c) 2004 Szabolcs
Gyurko
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005,
Szabolcs
Gyur
ko
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol
initialized
dmabounce: registered device samcop sdi on platform
bus
samcop sdi: probe: irq=124 irq_cd=31
dma=0.
samcop sdi: initialisation done.
MediaQ 1188 chip detected, base IRQ
130
Registered led device: number=power,
color=amber
Registered led device: number=notify,
color=green
Registered led device: number=bluetooth,
color=blue
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04
08:57:20
2006 UTC).
PXA2xx i2Sound: h2200 Audio activated
ALSA device list:
#0: iPAQ h2200 Audio [codec Philips UDA1380]
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
mmc0: host does not support reading read-only switch. assuming write-enable.
mmcblk0: mmc0:80ca SU512 495488KiB
mmcblk0: p1 p2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 100K
More information about the Angstrom-distro-users
mailing list