[Angstrom-devel] u-boot problems with beagleboard

[Koen Kooi]

Op 28 jan. 2012, om 18:56 heeft Kövesdi György het volgende geschreven:

>> Can you please apply the patch at
>> http://patchwork.ozlabs.org/patch/138255/ and try again?  Thanks.
> 
> Many thanx, it worx perfectly:
> 
> U-Boot 2011.12-00201-g137703b-dirty (Jan 28 2012 - 18:50:14)
> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
> OMAP3 Beagle board + LPDDR/NAND
> I2C:   ready
> DRAM:  256 MiB
> NAND:  256 MiB
> MMC:   OMAP SD/MMC: 0
> 
> However, one question:
> 
> +               } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) {
> +                       /* Beagleboard Rev C4, 512MB Nand/256MB DDR*/
> 
> Is it just a typo in the comment? (it has 256 Mb NAND)

Looks like it:

C4 = 256ram/256
C5 = 256ram/512

regards,

Koen