[Angstrom-devel] [beagleboard] Re: angstrom install --

[mohit hada]

1)I have completed

1)git clone git://git.angstrom-distribution.org/setup-scripts
2)MACHINE=beagleboard ./oebb.sh update
3)MACHINE=beagleboard ./oebb.sh bitbake virtual/kernel
4)MACHINE=your_machine ./oebb.sh bitbake base-image
5)MACHINE=your_machine ./oebb.sh bitbake console-image

*Even after following above steps i still have not got a git
directory of kernel source in this path .......*
setup-scripts/build/tmp-
angstrom_2008_1/work/
beagleboard-angstrom-linux-gnueabi/linux-omap-psp-2.6.32-r100a+gitr5fc29e7b2a76a64a739f857858ef0b98294aa155/temp
what should i set so as to get kernel source ?



Thanks
Nidhi
On Tue, May 3, 2011 at 2:20 PM, mohit hada <mohit.soc at gmail.com> wrote:

>
> On Tue, May 3, 2011 at 1:00 PM, Koen Kooi <koen at dominion.thruhere.net>wrote:
>
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> On 03-05-11 09:06, mohit hada wrote:
>> > Hello All
>> >
>> > Following angstrom link as suggested by Koen
>> > ....http://www.angstrom-distribution.org/building-angstrom
>> >
>> > I have completed
>> > 1)git clone git://git.angstrom-distribution.org/setup-scripts
>> > 2)MACHINE=beagleboard ./oebb.sh update
>> > 3)MACHINE=beagleboard ./oebb.sh bitbake virtual/kernel
>> >
>> > But i have not yet done ...
>> > 4)MACHINE=your_machine ./oebb.sh bitbake base-image
>> > 5)MACHINE=your_machine ./oebb.sh bitbake console-image
>> >
>> >
>> > As i already have an "angstrom image" lying on my sdcard obtained from
>> >> 24 hrs of bitbake from this link
>> >
>> http://processors.wiki.ti.com/index.php/Getting_Started_With_C6Run_On_Beagleboard
>> > ==============================
>> > ============================================
>> >
>> > My purpose to do all this is ..
>> > i want to be able to modify a kernel module file ..and want to have
>> > capability to cross compile it on ubuntu and insert onto Beagleboard
>> > angstrom.
>>
>> Please have a look at http://www.angstrom-distribution.org/ , especially
>> the first news article that mentions "kernel workflow".
>>
>
>
>
> Thanks Koen ..it was very helpful article ...
>
> but a basic conceptual doubt left .
>
> 1)I have completed
>
> 1)git clone git://git.angstrom-distribution.org/setup-scripts
> 2)MACHINE=beagleboard ./oebb.sh update
> 3)MACHINE=beagleboard ./oebb.sh bitbake virtual/kernel
>
> But i have not yet done ...
> 4)MACHINE=your_machine ./oebb.sh bitbake base-image
> 5)MACHINE=your_machine ./oebb.sh bitbake console-image
>
> *Even after following above steps i still have not got a git
> directory of kernel source in this path .......*
> setup-scripts/build/tmp-
>
> angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/linux-omap-psp-2.6.32-r100a+gitr5fc29e7b2a76a64a739f857858ef0b98294aa155/temp
> what should i set so as to get kernel source ?
>
> 2) Text copied as mentioned from "kernel workflow"
>
> "
> So I select a kernel which I wish to develop with, in my case this is in
>
> recipes/elphel/linux-elphel_git.bb
>
> So I first make sure I am starting from clean
>
> bitbake linux-elphel -c clean
> "
> *where is this recipe folder available?*
>
>
> 3)*Should i need to replace whole image on sdcard or can i just replace
> kernel ?*
>    as far as i got to know that i need "a uImage to replace old uImage "
> for that
> ..is it so?
>
> Nidhi
>
>
>
>
>
>>
>>
>> --
>>
>>
>>
>
>
> -
>
>


**

* *