[Angstrom-devel] do anyone know how bblayers should work?

[Maksym Parkachov]

Hi Matti,

if you used the setup-scripts, then bblayers.conf will be used only if
you start you build from the "build" directory. So, you should be in

~/setup-scripts/build

and your bblayers.conf should be in conf/ folder

~/setup-scripts/build$ ls conf
bblayers.conf  local.conf

Then, bitbake will pick it up and it works without problem. I tested
it on openembedded:2011.03-maintenance - bitbake:1.12 combination.

Regards,
Maksym.

On Thu, Aug 11, 2011 at 11:13 AM, matti kaasinen
<matti.kaasinen at gmail.com> wrote:
> Hi OE developers!
>
> I like the idea I've learned bblayers to work. I tried it first with
> openembedded:2011.03-maintenance - bitbake:1.12 combination the
> setup-script provides. Otherwise this combination works, but it seems
> to me that it ignores totally bblayers.conf.
> Is this true or do I possibly have some kind of set-up problem?
>
> I have also tried openembedded:master - bitbake master combination. It
> seems to follow bblayers.conf, but unfortunately toolchain building
> crashes while tying to make linux native.
>
> I also tried openembedded:2011.03-maintenance - bitbake:master
> combination, but it crashes in very early stages. I suppose these two
> are not compatible or could they be made working with some
> configuraiton tricks?
>
> regards,
> Matti
>
> _______________________________________________
> Angstrom-distro-devel mailing list
> Angstrom-distro-devel at linuxtogo.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
>