[Angstrom-devel] hx4700 booting problem

[Michael Angelov]

Hi All,

Could please help me to solve my problem.
I can not manage to boot angstrom linux, which I've build by myself,
on my hx 4700 device.
I've get following log tail, and device hangs.
...
[3.600000] asic3_mmc: ASIC3 MMC/SD Driver, controller at 0xe000000
[3.690000] Waiting 10sec before mounting root device...
[4.850000] mmcblk0: mmc0:d7a2 SD01G 1006080KiB
[4.860000]  mmcblk0: p1 p2
[13.720000] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[13.750000] VFS: Mounted root (ext2 filesystem).
[13.770000] Freeing init memory: 84K
...

It works fine if I use kernel image from site:
http://www.angstrom-distribution.org/unstable/autobuild/hx4700/zImage-2.6.21-hh20-r0-hx4700.bin
(size - 1324 KB)

If I build my own image (zImage-2.6.21-hh20-r20-hx4700.bin (size -
1185 KB)), I've get a boot problem.
I've used the procedure described at
(http://www.angstrom-distribution.org/building-angstrom)
I've tried org.openembedded.stable and org.openembedded.dev branches,
but result is the same.
I've even tried make liveramimage, but no luck as well.

Best Regards
Michael